Connect Base Modes
Mode | Description | Base Button Press to get there | How to recognize this mode | Video(s) |
Sleep Mode | Steady state, Base is ready to receive a button press and play sound Also functions as an “Exit” from other modes | From any other mode: double click Base Button | LED is out and Base plays sounds when linked buttons are pressed |
 |
Travel Mode | Base does not react to any button presses and uses minimal battery power | From Sleep Mode: hold Base Button until the LED fades out (15 sec)
| LED is out and base does not react to any presses of linked buttons | Travel Mode Enabled: Travel Mode Disabled: |
Sync Mode | Base is connecting to FluentPet servers and exchanging and updating info (presses, sounds, logging, ...). Base does not react to button presses. | From Sleep mode: Single click Base button | Single chime and LED that slowly blinks blue | In Sync Mode: |
Onboarding Mode | Base is creating its own WiFi-Network for the app to connect to. App then sends home WiFi credentials to the Base | From Sleep mode: Hold Base button for 5 seconds | Repeating chime and LED slowly alternates blue and cyan | In Onboarding Mode: |
Special function | Description | Base Button Press to get there | How to recognize this mode | Video(s) |
Factory Reset | Remove all stored WiFi network credentials and remove all linked buttons and sounds | Click Base button 5 times, and hold the button down on the 5th click for 10 seconds. | After the 10 seconds you'll hear the "shut down" sound. Base will not react anymore to any previously linked buttons |
|
Connect Base LED Meanings
Patterns
Breathing - 1 second to slowly turn on, 1 second to slowly turn off
Blinking - 3 brief flashes, every 2 seconds
Battery Level Meanings
Pattern | Meaning |
Solid green 
| Battery fully charged |
"Breathing" green 1 second to slowly turn on, 1 second to slowly turn off 
| Battery charging |
"Blinking" green 5 brief successive flashes, every 2 seconds  | Low battery (0-20%) |
Mode-Specific LED Meanings
Sync Mode LEDs
How to recognize this mode | What it means |
Slow cyan breathing 
| Base is "linking" with a connect button |
Solid cyan for 3 sec 
| Base successfully linked with a connect button |
Alternating cyan & green 
| Firmware update in progress |
Onboarding Mode LEDs
How to recognize this mode | What it means |
Slow blue breathing 
| Base is trying to connect to a registered WIFI network and looking for buttons in linking mode. |
Short rapid flashing blue bursts for 3 secs 
| Base failed to connect to WIFI network |
Short rapid flashing cyan bursts for 3 secs 
| Base failed to connect to server |
Solid blue for 3 sec 
| Base successfully connected to WIFI network |
Connect Button LED Meanings
Color 1 | Color 2 | Pattern | Meaning |
Cyan
| Green
| Alternating cyan & green | Button firmware update in progress |
Cyan
|
| Breathing cyan | Linking button to base |
Cyan
|
| Solid cyan for 3 sec | Button successfully linked to base |
Blue
|
| Solid blue briefly after release | Button was pressed |